|
|
|
|
|
Interfaces
|
|
DVC2 GOLD
The best Daslight interface with more versatility.
- Same features as DVC2 512 with 1024 DMX channels
- 2x512 DMX OUT (Live) or 512 DMX OUT (Stand Alone) with 3 Pin XLR
- Build-In Real Time Clock and Time Triggering without computer
- Additional power supply connector (9DC) for memory mode required
- Internal memory (96k) for up to 22000 steps
(depending on the number of channels used)
- 2 buttons to scroll between scenes, programs and sequences
- The third button can be used for a Stand Alone dimmer function
DVC2 GOLD works with Virtual Controller 1, 2 and Virtual 3D software. This interface controls 2x512 DMX channels through the computer or 512 DMX channels in Stand Alone mode. The Stand Alone mode is easy to use and versatile : program and load your scenes in the internal memory of the interface, power with an external 9-12Volt DC power source and select your scene using the buttons and it sends the DMX signals that you have pre-programmed to your lighting fixtures. The new Build In CLOCK function is simply wonderful : you can trigger a scene when you want, tomorrow at 10 pm, next week, once a year, repeat the scene every hour, play it only 30 minutes, add few minute of show every days...
|
|
|
|
|
|
DVC2 512
An easy to use and effective DMX512 controller.
- 512 DMX OUT and 512 DMX IN with 3 Pin XLR
- Plug and play USB 2.0 interface. Power taken via the USB interface
- HE10 connector: Trigger scenes and effects through direct simple
contacts closures (allows up to 255 triggering actions)
- Compatible with any type of DMX 512 fixtures (lights and consoles)
- 2 year guarantee
DVC2 512 works with Virtual Controller 1, 2 and Virtual 3D software.
This interface controls 512 DMX channels and must be connected to a PC.
|
|
|
|
|
|
DVC2 ECO 512
An economic version of the DVC2 512.
- 512 DMX OUT with 3 Pin XLR
- Plug and Play USB 2.0 interface. Power taken via the USB interface
- Compatible with any type of DMX 512 fixtures
- 2 year guarantee
DVC2 ECO 512 works with Virtual Controller 1, 2 and Virtual 3D software. This interface controls 512 DMX channels and must be connected to a PC.
|
|
|
|
|
|
DVC2 128-M
A cheap and easy to use controller.
- 128 DMX OUT (PC mode), 60 DMX OUT (Stand Alone mode)
- 4 triggering actions (I/O ports)
- Plug and play USB 2.0 interface with power via USB interface
- Compatible with any type of DMX 512 fixtures
- 1 year guarantee
DVC2 128-M works with Virtual Controller 1 and 2 software but is restricted to a max of 128 channels. This interface must be connected to a PC. Thus, you will be able to control your lighting without your PC. This interface requires a 9V power supply in stand-alone mode.
DVC2 128-M features:
- 128 channels in PC mode / 60 in Stand alone mode
- The number of scenes, steps and effects are restricted to 30
- No Midi control
- 4 Scenes can be played simultaneously
|
|
|
|
|
|
DVS 3D
An economic 3D viewer with amazing rendering for any traditional lighting console.
- 512 DMX IN with 3 Pin XLR
- Plug and play USB 2.0 interface.Power taken via the USB interface
- Compatible with any type of DMX 512 lighting console
- 2 year guarantee
DVS 3D works with Virtual 3D software. This interface can take DMX input and Ethernet through the 3D software and must be connected to a PC. Links are established between fixtures-libraries and DMX channels. As a result, your 3D simulator and its DVC 512 IN interface are totally compatible with all DMX consoles available on the market. Software channels can be controlled externally through conventional DMX boards in real-time. Along with the interface comes a driver disk for Windows.
|
|
|
|
|
|
|
|
|
