DVC4 with Light Rider App
-
- Posts: 14
- Joined: Sun Mar 05, 2017 7:34 am
- Operating System: Windows
DVC4 with Light Rider App
Has anyone tryed this?
For me it does not work!
https://www.youtube.com/watch?v=dxciMGCOHjs
where i can get some info?
For me it does not work!
https://www.youtube.com/watch?v=dxciMGCOHjs
where i can get some info?
-
- Posts: 14
- Joined: Sun Mar 05, 2017 7:34 am
- Operating System: Windows
Re: DVC4 with Light Rider App
So, news...
You need Firmware 1.24 for your DVC4-GZM and than the app works.
You need Firmware 1.24 for your DVC4-GZM and than the app works.
-
- Posts: 14
- Joined: Sun Mar 05, 2017 7:34 am
- Operating System: Windows
Re: DVC4 with Light Rider App
Attention!
With the Firmware 1.24 in DVC4-GZM LightRider works, but the kommunication between DasLight4 and the DVC4-GZM
is broken!
I'm back to 1.23 and now DasLight4 is working again withe the DVC4.GZM
With the Firmware 1.24 in DVC4-GZM LightRider works, but the kommunication between DasLight4 and the DVC4-GZM
is broken!
I'm back to 1.23 and now DasLight4 is working again withe the DVC4.GZM
Re: DVC4 with Light Rider App
Hi pixeljunky,
If you download and install the latest Daslight 4 Beta (10/04/2017) the DVC4 GZM with Firmware 1.24 will be recognised.
https://storage.googleapis.com/nicolaud ... t4Beta.exe
Kind regards
If you download and install the latest Daslight 4 Beta (10/04/2017) the DVC4 GZM with Firmware 1.24 will be recognised.
https://storage.googleapis.com/nicolaud ... t4Beta.exe
Kind regards
Benno
--
Product Support
--
Product Support
Re: DVC4 with Light Rider App
Hi.
That was working but now I can not connect to the DVC4GZM, is there something that changed in the new nightrider app or in the DVC4 firmware ?
That was working but now I can not connect to the DVC4GZM, is there something that changed in the new nightrider app or in the DVC4 firmware ?
Re: DVC4 with Light Rider App
Hi Kew,
The latest firmware of the DVC4 GZM is 1.24 and it still should work with Light Rider. Are you using Android or iPad? Are you using the latest version of the app?
The latest firmware of the DVC4 GZM is 1.24 and it still should work with Light Rider. Are you using Android or iPad? Are you using the latest version of the app?
Benno
--
Product Support
--
Product Support
Re: DVC4 with Light Rider App
Hi,
I got a DVC4 Gold ZM and i would like to conect it to an iPad and use Light Rider app, is it possible ?
Thanks in d’avance for your answer !
I got a DVC4 Gold ZM and i would like to conect it to an iPad and use Light Rider app, is it possible ?
Thanks in d’avance for your answer !
Last edited by Steeve on Mon Jul 08, 2019 10:08 am, edited 2 times in total.
Re: DVC4 with Light Rider App
Hey,
I'm afraid I don't understand what you're asking. Feel free to write it in your mother tongue (french ?) if you prefer.
Best regards,
I'm afraid I don't understand what you're asking. Feel free to write it in your mother tongue (french ?) if you prefer.
Best regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
Re: DVC4 with Light Rider App
Sorry i was really tired !
Re: DVC4 with Light Rider App
Hello,
Yes LightRider should work in its FULL mode when connecting a DVC GZM to it.
You can connect your interface to it over the network (by connecting your interface and your tab to the same network) or plug your interface directly to your tab, using the right adapters. This last option only works if you are using an Android device.
Hope this helps.
Best regards,
Yes LightRider should work in its FULL mode when connecting a DVC GZM to it.
You can connect your interface to it over the network (by connecting your interface and your tab to the same network) or plug your interface directly to your tab, using the right adapters. This last option only works if you are using an Android device.
Hope this helps.
Best regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
Re: DVC4 with Light Rider App
Last edited by tocnaza on Thu Jun 04, 2020 8:07 am, edited 3 times in total.
Re: DVC4 with Light Rider App
Hi all, is it possible to connect wireless the DVC4 (GZM in my case) with the Light Rider app on a tablet? If yes how? Do you need to use a converter (ethernet to XLR) and add a wireless dmx donner, or you connect via ethernet the interface on a wifi router? Or can just add a wireless donner an XLR output?
Re: DVC4 with Light Rider App
Hello,
Your GZM should be connected to your router using ethernet cable. The app should be connected to the same network via WIFI.
Hope this helps.
Regards,
Your GZM should be connected to your router using ethernet cable. The app should be connected to the same network via WIFI.
Hope this helps.
Regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500