DVC4 Assigning buttons to programs
DVC4 Assigning buttons to programs
In a commercial ticket I send about this device I was told I could flash trigger programs of a showfile running on a PC it is connected through over Ethernet. It does output the DMX I feed it in through the software (it has been recognised and everything). But I can't seem to find the place to assign programs to buttons.
Re: DVC4 Assigning buttons to programs
Hello,
Which buttons do you wish to assign your scenes to ?
Regards,
Which buttons do you wish to assign your scenes to ?
Regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
Re: DVC4 Assigning buttons to programs
The buttons 1 through 10, preferably with the different pages A through C being seperately assignable.
Re: DVC4 Assigning buttons to programs
Hello,
This feature doesn't exist in Daslight4. These buttons are made to allow you to trigger your scenes in StandAlone mode, once you have saved your show into your device's memory.
Regards,
This feature doesn't exist in Daslight4. These buttons are made to allow you to trigger your scenes in StandAlone mode, once you have saved your show into your device's memory.
Regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
Re: DVC4 Assigning buttons to programs
Then I seem to have been informed wrongly by your commercial department, where in the Lightingsoft Support Center Ticket department, before buying, I specifically asked whether having this unit connected over ethernet to the PC and using it to trigger programs like a flash button was an option for this device. Both Bruno Nicolaudie and Bert Gering confirmed with this application the product would be great for what I was looking for.
Will this option be possible in DASlight 5? And any idea as to when DASlight 5 will be released?
Will this option be possible in DASlight 5? And any idea as to when DASlight 5 will be released?
Re: DVC4 Assigning buttons to programs
Hello,
I understand there might have been a confusion here, and I apologize for this. I can confirm that this feature isn't available on Daslight4, since the device was ingeneered after Daslight4 was released. That being said, Daslight5 (still being developped at this moment) will be made to work with these buttons in LIVE mode.
Hope this makes it more clear.
Regards,
I understand there might have been a confusion here, and I apologize for this. I can confirm that this feature isn't available on Daslight4, since the device was ingeneered after Daslight4 was released. That being said, Daslight5 (still being developped at this moment) will be made to work with these buttons in LIVE mode.
Hope this makes it more clear.
Regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
Re: DVC4 Assigning buttons to programs
Okay, thanks for the clearup and the fast replies. Is there any roadmap for the development & release of Daslight 5 publicly available yet? Then I can communicate this to the customer who specifically wanted this use case for the installation it will be used for.
-
- Posts: 15
- Joined: Fri Jun 11, 2021 9:13 pm
- Operating System: Mac OS X
- Location: Deutschland
- Contact:
Re: DVC4 Assigning buttons to programs
Hallo
Ik heb net even nagekenen wat we in het Ticket geschreven hebben. Daar staat niets in over dat je de Buttons kunt gebruiken voor triggering. Er werd u uitgelegt dat men de Gold en GZM op je netwerk kunt aansluiten, en dan met Daslight, die op een Pc is, die in hetzelfde netwerk is, kunt werken, zonder het Interface met een USB kabel te verbinden. U kunt graag nog even op dat Ticket antwoorden, en nalezen. Zowel Bruno, als ik hebben niet geschreven dat je Scenen in Daslight kunt triggeren met de Buttons op de Gold.
Mvg
Ik heb net even nagekenen wat we in het Ticket geschreven hebben. Daar staat niets in over dat je de Buttons kunt gebruiken voor triggering. Er werd u uitgelegt dat men de Gold en GZM op je netwerk kunt aansluiten, en dan met Daslight, die op een Pc is, die in hetzelfde netwerk is, kunt werken, zonder het Interface met een USB kabel te verbinden. U kunt graag nog even op dat Ticket antwoorden, en nalezen. Zowel Bruno, als ik hebben niet geschreven dat je Scenen in Daslight kunt triggeren met de Buttons op de Gold.
Mvg