Bug: Position value are not correctly shown

lucarosty · Post by **lucarosty** » Sun Nov 03, 2013 10:31 pm

Hi all,
I've installed the last beta for DVC3 and when I change the Pan and Tilt value on the slider on release the cursor return always to 0 (but the light is in the correct position)
The problem is not present it the general tab

Post by **simonB** » Tue Nov 26, 2013 4:02 pm

Make sure you have fixtures selected in the group window. Also try with the latest beta and let me know if you have the same problem

lucarosty · Post by **lucarosty** » Thu Nov 28, 2013 7:45 pm

Yes the problem is present also in the latest beta.
The fixtures are all selected and the moving head in the project change the position, but when I release the pan/tilt slider in the live or editor mode the slider return to 0 and the light mantains the correct position.

lucarosty · Post by **lucarosty** » Thu Dec 12, 2013 9:16 pm

Ok with the last beta (10th december) the problem is not present