Daslight Forum

Hi all,
I've installed the last beta for DVC3 and when I change the Pan and Tilt value on the slider on release the cursor return always to 0 (but the light is in the correct position)
The problem is not present it the general tab

Make sure you have fixtures selected in the group window. Also try with the latest beta and let me know if you have the same problem

Yes the problem is present also in the latest beta.
The fixtures are all selected and the moving head in the project change the position, but when I release the pan/tilt slider in the live or editor mode the slider return to 0 and the light mantains the correct position.

Ok with the last beta (10th december) the problem is not present