Hi,
this is my 2nd try to give a chance to dvc3 comming from Licon1X.
Simple 1st configuration making a generic PAR64 chase with three PAR64.
Red, green, blue
Named Scene 1 in group 1 Chaser 1.
Release off
Start scene 1
255-0-0
0-255-0
0-0-255
255-0-0
aso
No Problem at all
Next step
New Group and scene named Backlight blue
Release off
DMX 57 on Channel 3
Start scene 2
0-0-57
No Problem at all
Configured in live all three channels to HTP
Run both scences
255-0-57
0-255-57
0-0-57 <<<-- Problem with HTP on
Additional Information:
Set fader channel 3 to dmx255 in general it isn't possible to revert to dmx0 in general.
Switch to PAR64 section and set fader to DMX0 will set the DMX to 57 again.
Always HTP is on. Set LTP in general no problem, but the chase from scene 1 is not working prblably on channel 3.
Tested with Beta Oct. 6 2015
and Release Aug 18 2015
Any suggestions?
Scene Editor - HTP not working?
-
- Posts: 18
- Joined: Sat Apr 04, 2015 11:48 am
- Location: Germany
Scene Editor - HTP not working?
Last edited by ChristianB on Fri Nov 27, 2015 12:56 pm, edited 1 time in total.
-
- Posts: 18
- Joined: Sat Apr 04, 2015 11:48 am
- Location: Germany
-
- Posts: 18
- Joined: Sat Apr 04, 2015 11:48 am
- Location: Germany
-
- Posts: 18
- Joined: Sat Apr 04, 2015 11:48 am
- Location: Germany
-
- Posts: 18
- Joined: Sat Apr 04, 2015 11:48 am
- Location: Germany
Okay,
Version 02/12 works now but not for 100%
HTP works if i manually set a fader to a different value on general tab.
But if i start another scence where the dimmer is present only the last started scene did work.
All channels set to htp
eg Channel 1-3 Scene Chaser
Channel 1 Scebe backgroundlight
1st -- Set Scence Chaser to on all off 3 Channels work
2nd -- set scene Backgroundloght
the chaser work only on channel 2-3
1st -- set scene background to on
2nd -- set scene chaser to on
Supprise. In my scene channel 1 is set via dimmerfader to 20% and set to htp.
The chaser sets the value form 0-20% but the scence should work 20-100%.
Please help.
@Benno your email adress is still required.
Version 02/12 works now but not for 100%
HTP works if i manually set a fader to a different value on general tab.
But if i start another scence where the dimmer is present only the last started scene did work.
All channels set to htp
eg Channel 1-3 Scene Chaser
Channel 1 Scebe backgroundlight
1st -- Set Scence Chaser to on all off 3 Channels work
2nd -- set scene Backgroundloght
the chaser work only on channel 2-3
1st -- set scene background to on
2nd -- set scene chaser to on
Supprise. In my scene channel 1 is set via dimmerfader to 20% and set to htp.
The chaser sets the value form 0-20% but the scence should work 20-100%.
Please help.
@Benno your email adress is still required.
Hi Christian
HTP and LTP determine the channel priority between the fader and the scene, not between scenes. Unfortunately it's not possible to combine scenes in this way in Daslight (we may consider integrating it in future). The Sunlite Suite 2 software from our Nicolaudie brand has the possibility to do this however.
HTP and LTP determine the channel priority between the fader and the scene, not between scenes. Unfortunately it's not possible to combine scenes in this way in Daslight (we may consider integrating it in future). The Sunlite Suite 2 software from our Nicolaudie brand has the possibility to do this however.
-
- Posts: 18
- Joined: Sat Apr 04, 2015 11:48 am
- Location: Germany