My interface is recognized by the machine and shows up in the daslight hardware manager, however when clicking on this an error is displayed.
"Please update hardware manager or please contact the manufacturer"
When clicking OK on this a message is show next to my device information saying
"Please contact support center. XHL-NAP"
If i connect the interface to a machine running an earlier build of daslight such as April 2019 I get no issues and this functions as expected.
Is there a fix for this problem?
Windows 10, tested on multiple machines, can replicate consistenly.
output from hardware manager:
Name: Siudi_7B
Type: SIUDI7B
Bus: DasUsb
State:
Serial: 128322
HWUID:0301500F-AF1DA063-5A037428-F50020C6
ProductName:DVC4 GOLD ZM
ProductCode: 481
Firmware Version:1.24
Firmware Date:2018-12-13 11:13:03
Settings:
> Longitude:-73.95
> Latitude:40.75
> Time Zone:-300
> Simple Summer DST:25/3
> Simple Winter DST:30/10
> Enable Ethernet:true
> DHCP:true
> Address:192.168.1.20
> Mask:255.255.255.0
> Gateway:192.168.1.1
> Name:Siudi_7B
> Scene:true
> Scene Number:
> Last Scene:false
> Simulate the last date/time trigger:false
> Time/Calendar:true
> IR:0
> Ports:true
> Ports Replay:false
> Ports Binary:true
> Pages Priority:0
> Scene Fade:true
> Force Scene fade Time:false
> Force Scene fade Time duration:0
> Dimmer:true
DVC4 GZM not working on latest update
-
- Posts: 8
- Joined: Fri May 29, 2020 6:02 pm
- Operating System: Windows
- Location: Chesterfield,GB
DVC4 GZM not working on latest update
Paul
Lighting Design for Wrestling Events & Band's
Lighting Design for Wrestling Events & Band's
Re: DVC4 GZM not working on latest update
Hello,
Please contact our support center via our website. You'll get an answer shortly.
Regards,
Please contact our support center via our website. You'll get an answer shortly.
Regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
-
- Posts: 8
- Joined: Fri May 29, 2020 6:02 pm
- Operating System: Windows
- Location: Chesterfield,GB
Re: DVC4 GZM not working on latest update
Thanks for the response
I've raised a ticket with the details from above
I've raised a ticket with the details from above
Paul
Lighting Design for Wrestling Events & Band's
Lighting Design for Wrestling Events & Band's