DVC4 Gold stand alone pan/tilt problem
-
- Posts: 4
- Joined: Sat Sep 05, 2015 2:21 am
- Location: Berlin
DVC4 Gold stand alone pan/tilt problem
I recently bought the new DVC4 Gold Interface and was happy to be able to quick select scenes with the buttons. Now I have the Problem, that I programmed a scene with Movingheads for example 6 steps of moving with fade time. Inside the software everything works fine and the heads move as programmed. But when I put that scene onto the interface in stand alone mode, the moving heads do not move like programmed. It seems like they always go to pan/tilt point zero between each step and than to the programmed point. Any chance to solve that problem?
Re: DVC4 Gold stand alone pan/tilt problem
Hello,
Can you send over your showfile for some tests ?
Regards,
Can you send over your showfile for some tests ?
Regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
-
- Posts: 4
- Joined: Sat Sep 05, 2015 2:21 am
- Location: Berlin
Re: DVC4 Gold stand alone pan/tilt problem
TomHat wrote:Hello,
Can you send over your showfile for some tests ?
Regards,
Showfile is on its way.
Btw. with the old DVC3 Interface there is no problem, using the same scenes.
Thanks and regards
Lars Baecker