Hello, I just switched over from My DMX3.0 to Daslight due to the super scene feature. I want to create light show to music and doing steps with out that feature is hard.
I just got Daslight 5 yesterday and was playing around with it and I added all my fixtures and I am creating scenes and I can't do the fade in a scene or between steps. I put in the Fade time like I would in my Dmx 3 and then when I clicked play it just jumps not fades. So went into the properties that new for me and played around with that and still does not work.
Any advise on what I am doing wrong. Thanks
Fading in Steps
Re: Fading in Steps
Hello
There are some changes about step calculation method in Daslight 5.
If you want an fade between 2 steps on the dimmer for example, be sure the feature/channel dimmer is ON (creen circle) in the two steps.
Regards
There are some changes about step calculation method in Daslight 5.
If you want an fade between 2 steps on the dimmer for example, be sure the feature/channel dimmer is ON (creen circle) in the two steps.
Regards
-
- Posts: 42
- Joined: Fri Jul 01, 2022 12:13 pm
- Operating System: Windows
Re: Fading in Steps
This doesn't work, the lights do not fade between steps despite the dimmer being turned on there is no fade between the steps and the dimmer just stays at 100%. The lights just flash to the next colour.
Re : Décoloration par étapes
Bonjour, il faut mettre les deux scènes identiques une sur l'autre, celle du dessus 0 % , la deuxième en dessous avec le gradateur à 100 %
-
- Posts: 74
- Joined: Mon Apr 03, 2023 5:01 pm
- Operating System: Windows
- Location: Büro
- Contact:
Re: Fading in Steps
Also, bei mir funktioniert das sehr gut!
Es muss nur die "Wait time" größer als die "Fade time" sein.
Gruß Klaus
Es muss nur die "Wait time" größer als die "Fade time" sein.
Gruß Klaus
- Attachments
-
- Daslight Steps.JPG (23.17 KiB) Viewed 2179 times
-
- Posts: 1
- Joined: Mon Apr 22, 2024 9:18 pm
Re: Fading in Steps
Hey together,
to pick this up. Can I edit the fade time between steps quick and easy in live mode?
What I love to do in live shows is to play with the fadetime, fadetime 0 for quick and fast changes and fade times 1-2 seconds with waiting time 0 as a super nice pulsing effect.
Of course I can create a scene group for flashing and pulsing, but one group would be much nicer
Cheers
Simon
to pick this up. Can I edit the fade time between steps quick and easy in live mode?
What I love to do in live shows is to play with the fadetime, fadetime 0 for quick and fast changes and fade times 1-2 seconds with waiting time 0 as a super nice pulsing effect.
Of course I can create a scene group for flashing and pulsing, but one group would be much nicer
Cheers
Simon